FEATURES

> Full color Instructional Placard >   All weight stack frames are alike > 1/4" nylon coated aircraft cable driven > Five pound add-on weight system >   Form fitted polystyrene weight stack shields >   Self adjusting head pad > All axis of rotation have RED, permanent indication > Start range limitation with numerical indexing, 1-7 >   Stop range limitation with alphabetical indexing, A-G

>   Counter balanced drive arm > 75 Lb. Split weight stack with 5 and 10 lb increments >   Ergonomically formed and positioned handles with custom made grips > ABS Seat and Back protective dishes >   Foot activated seat adjustment fees both hands for vertical adjustment >   Easy reach RED, pull knob allows the seat to rotate 365 degrees and lock into 8 positions, every 22 degree > Custom made rubber feet with bolt down holes >   Seamless upholstery will prevent fungus and bacteria from hiding in the seams

WARRANTY

Our limited lifetime warranty is the industry’s best with a worry-free pledge that reflects a 40-year commitment to excellence. All Raptor Machines are covered by the following warranty:

Frame and welds - Lifetime Warranty Guide rods, bushings and pulley wheels - 5 Years Bearings - 10 Years Upholstery - 1 Year

SPECIFICATIONS

> Adjustable positions on all machines to accommodate all users to ensure correct biomechanical function. Adjustments are made with Heavy Duty spring loaded colored pull-pin knobs. >   Weight Stacks are adjusted with a tethered, magnetic selector pin that extends through the entire weight stack. > Cable system. Cables are 1/4"  thick 4800lb test military spec galvanized oil impregnated air craft cable finished with a tough nylon coating to 3/16"  thick. >   Manual Tension adjusters on every machine for the cable adjustments. > Weight stack plates are solid steel machined precisely to with in a 1/4 oz of weight. > Weight stack is accessible from a seated position. > Weight stacks are enclosed in Full Length Shrouds > Weight system allows user to increase resistance by 5lb increments. > Instructional guide charts used to inform correct usage for each machine along with anatomical highlights to show which muscle groups are being worked. > Each machine is made with a lower starting weight stack and has counter-balanced arms when needed.

> Heavy-duty 40 oz. commercial grade marine naugahyde upholstery which is 85% mildew resistant. High density closed cell foam reinforced by 3/4" thick plywood backing for stable support. >   Exceeds all ASTM requirements. >   Guide rods are 1” CCRO ANSI 1045, solid steel hard chrome-plated with tensile strength of 75,000psi. >   Frames are constructed of High Stress 3/16"  ASTM A-500 grade B structural steel tubing (11 gauge). 2" x 4", 2" x 3"  tubing. 2" x 3"  tubing is use on all uprights, 2" x 2" x 1/8"  ASTM A-500 grade B structural carbon steel tubing (11 gauge) is used on cross members and benches. >   All welds are ground down and stress tested >   3-stage pre-paint preparatory process that includes a state of the art wash system that paralyzes the material. Then the material is processed through a dryer. The material is then sent through a preheat stage before it has the magnetic paint powder applied. (optional colors) >   Urethane foam grades are a minimal grading of HR-125 (density pcf of 2.60 plus/minus 0.10 and above in high-compression areas (HR-150 with a density pcf of 4.60 plus/minus 0.30).

>   Cams are computer designed and laser cut to exact shape to allow proper variable resistance throughout the exercises complete range of motion. All Cams are 1/4" thick solid steel. The cams are different for each machine to provide the correct movement for the exercise. >   Shrouded pulley housing is 6" x 1/4"  thick solid steel. >   Pulley Wheels are 4 1/2" and 6" solid fiberglass reinforced body with a 1/2"  cable groove. Oil dipped double sealed racer ball bearings with a 1/2" axis shaft hole. Sealed for moisture and dust proof.