 |
Chest Press
P-1000 |
|
| |
 |
|
| Features |
|
| > |
|
Foot pedal for easy entry / exit |
|
| > |
|
ABS seat & back protective dishes |
|
| > |
|
Seamless upholstery |
|
| > |
|
Natural rubber handgrips - ergonomically
formed and positioned |
|
| > |
|
Five position seat adjustment |
|
| > |
|
Bright red colored pull knobs |
|
| > |
|
Form fitted weight stack shield |
|
| > |
|
Instructional color placard |
|
| > |
|
5 lb add on weight system |
| |
| Dimensions |
|
Width - 54 inches
Length - 60 inches
Height - 69 inches |
|
| 300 lb weight stack |
|
| Unit Weight: 595 lb |
|
|
| |
| |
| Warranty |
|
| Our limited lifetime warranty is the industry’s
best with a worry-free pledge that reflects a 40-year commitment to excellence.
All Raptor Machines are covered by the following warranty: |
|
| Frame and welds - Lifetime
Warranty |
|
| Guide rods, bushings and
pulley wheels - 5 Years |
|
| Bearings - 10 Years |
|
| Upholstery - 1 Year |
|
| |
| Specifications |
| |
| > |
|
Adjustable positions on all machines to accommodate
all users to ensure correct biomechanical function. Adjustments
are made with Heavy Duty spring loaded colored pull-pin knobs. |
|
| > |
|
Weight Stacks are adjusted with a tethered, magnetic
selector pin that extends through the entire weight stack. |
|
| > |
|
Cable system. Cables are 1/4” thick 4800lb
test military spec galvanized oil impregnated air craft cable finished
with a tough nylon coating to 3/16” thick. |
|
| > |
|
Manual Tension adjusters on every machine for
the cable adjustments. |
|
| > |
|
Weight stack plates are solid steel machined
precisely to with in a _ oz of weight. |
|
| > |
|
Weight stack is accessible from a seated position. |
|
| > |
|
Weight stacks are enclosed in Full length Shrouds |
|
| > |
|
Weight system allows user to increase by 5lb
increments. |
|
| > |
|
Instructional guide charts used to inform correct
usage for each machine along with anatomical highlights to show
which muscle groups are being worked. |
|
| > |
|
Each machine is made with a lower starting weight
stack and has counter-balanced arms when needed. |
|
|
| > |
|
Heavy-duty 40 oz. commercial grade marine naugahyde
upholstery which is 85% mildew resistant. High density closed cell
foam reinforced by _” thick plywood backing for stable support. |
|
| > |
|
Exceeds all ASTM requirements. |
|
| > |
|
Guide rods are 1” CCRO ANSI 1045, solid
steel hard chrome-plated with tensile strength of 75,000psi. |
|
| > |
|
Frames are constructed of High Stress 3/16”
ASTM A-500 grade B structural steel tubing ( 11 gauge). 2”
x 4”, 2” x 3” tubing. 2” x 3” tubing
is use on all uprights, 2” x 2” x 1/8” ASTM A-500
grade B structural carbon steel tubing (11gauge) is used on cross
members and benches. |
|
| > |
|
All welds are ground down and stress tested |
|
| > |
|
3-stage pre-paint preparatory process that includes
a state of the art wash system that paralyzes the material. Then
the material is processed through a dryer. The material is then
sent through a preheat stage before it has the magnetic paint powder
applied. (optional colors) |
|
| > |
|
Urethane foam grades are a minimal grading of
HR-125 (density pcf of 2.60 plus/minus 0.10 and above in high-compression
areas (HR-150 with a density pcf of 4.60 plus/minus 0.30). |
|
|
| > |
|
Cams are computer designed and laser cut to exact
shape to allow proper variable resistance throughout the exercises
complete range of motion. All Cams are 1/4” thick solid steel.
The cams are different for each machine to provide the correct movement
for the exercise. |
|
| > |
|
Shrouded pulley housing is 6” x _”
thick solid steel. |
|
| > |
|
Pulley Wheels are 4 _” and 6” solid
fiberglass reinforced body with a 1/2” cable groove. Oil dipped
double sealed racer ball bearings with a _ “ axis shaft hole.
Sealed for moisture and dust proof. |
|
|
|
|
 |
| |